The 3 main things you’ll need to begin a Chalk Couture project is the Chalkology Paste, a Chalk Transfer and whatever surface you’ll be using. Most people think that because you’re using chalk products that it just goes on chalkboards but you can actually use Chalk Couture Products on other surfaces like glass, wood, mirrors, tile, canvas, white boards, burlap. painted furniture and more!

Super cool, right?

To get started you’ll want to carefully peel your transfer off the backing sheet. I recommend “fuzzing” new transfers by placing on a lint free cloth or towel and then removing. This just makes it so it’s not super sticky to avoid stretching when you peel off your surface.

Now that you’re ready to use your transfer, you’ll want to place it on your surface. Press and smooth it out. Then grab some Chalkology Paste in the color(s) you’d like to use. Apply a small amount of Chalkology Paste by spreading it over the design. You can use multiple colors if you’d like. I recommend using the Chalk Couture Squeegee to apply and smooth on your transfer. It makes things way easier but you can use something like a credit card if for some reason you don’t have the Chalk Couture Squeegee.

Once you have all the silk screen areas covered, just scrape off the excess paste and put it back in the jar. All you need is a thin, even layer. There's no need to make it thick and waste any products. You can really make this Chalkology Paste last a long time if you just stick to thin layers. The process is quick so you don’t want the Chalkology Paste to dry on the Chalk Transfer.  If you do  leave it on a little too long and feel it’s drying too quickly, just take a little spray bottle and lightly mist it or place a wet paper towel over the top to moisten it back up. Don’t get it too wet though… just mist. After scraping off the excess, peel the Chalk Transfer away while paste is still wet to reveal the design. Viola!!! It’s like magic!

Now that you’re done be sure to clean your transfer so you can continue to use it again and again. To clean it, you can rinse with water and then just wipe with sanitizing wipes. This helps to remove any chalk residue and keeps the adhesive lasting longer. Then set your Chalk Transfer down flat (sticky side up) to air dry. Once it’s dry, don’t forget to put the backing sheet back on, shiny side to the sticky side of the transfer. And if you’re wanting to use the Chalk Transfer again for another project right away, you can skip putting the backer on and just use a blow dryer to dry both sides.

Have I mentioned GLITTER yet? OMG… Yes, you can even apply glitter to the Chalkology Paste after you peel back your Chalk Transfer. Be sure to do this while the paste is still wet. Any fine glitter will do the trick. You can even layer it up like in the video above.